A returning client once walked into the Lawhat showroom asking for "the ArchiFlute one," having seen the name on an invoice from a friend's villa project without ever being told what it actually referred to. It is a fair question, and a surprisingly common one. ArchiFlute is not a single product. It is the name Lawhat gives to its entire WPC panel range, five distinct profiles, fifty individual panels, that between them cover every ribbed, fluted and slatted wall treatment on the site. This is the range explained from the top down, so the name means something before a single finish is chosen.

What ArchiFlute actually is

ArchiFlute is Lawhat's WPC, wood plastic composite, architectural panel range: the material and engineering platform behind every rib, flute and slat profile the company sells. It is described on Lawhat's own collection page as the fastest-growing specification in the UAE interior market, and the reasoning holds up on inspection: WPC gives a level of dimensional stability and heat tolerance that a flat printed or extruded material cannot match, a difference this site's own PVC vs WPC comparison sets out in full.

The five profiles inside the range

Nova, a 150mm ribbed board in wood-effect finishes, Nero Oak, Havana Walnut, Truffle Oak, Velvet Oak and Monaco Sand, built for joinery runs, wardrobe fronts and tighter wall sections where a narrow, structured rib suits the space better than a wide one.

Arco, the large-format ribbed range, running from 55mm bundle widths up to single 215mm and 315mm boards, in Linen and Ripple and Moonstone tones rather than wood finishes, built to be the wall rather than to disappear into it.

Forma, the large fluted range, in 100/150/200mm bundles and single 300mm and 400mm boards, sharing several finish names with Arco, Seashell, Champagne and Golden Luxe among them, and covering the continuous, soft-curved groove most people picture when they say "fluted."

Tempo, a narrower 210mm fluted board in wood-effect finishes, Velvet Oak, Havana Walnut, Monaco Sand and Nero Oak, the flute equivalent of Nova's scale and use case.

Quadra, the slatted A&B panel, built with genuine open gaps between individual slats rather than a continuous solid face, in Sandstone and Frost tones, the one profile in the range built specifically around acoustic performance rather than surface texture alone.

Between the five, ArchiFlute covers every combination of scale, wood tone or abstract finish, and structural profile that a ribbed, fluted or slatted brief could call for. This site's dedicated comparisons, ribbed vs fluted and slatted vs fluted, work through the visual and acoustic differences between these profiles in far more depth than a range overview needs to repeat here.

Why it is one range and not five separate products

Every ArchiFlute profile shares the same WPC core, the same heat and humidity tolerance, and, in several cases, the same finish names across different profiles, Ripple and Moonstone tones running through both Arco and the flat Designer bamboo panels, for instance. That means a project can specify one tone across two different wall treatments, a flat panel in one room and a ribbed or fluted version of the same finish family in an adjoining space, without the two looking like they came from different suppliers.

Where ArchiFlute is the right starting point

Any brief that wants a genuinely three-dimensional, structural wall treatment, rather than a flat printed or textured surface, starts here. A hallway or reception wanting an architectural rhythm, a bedroom headboard wanting a soft sculpted curve, a media room wanting a partition with real acoustic behaviour, all point to a different profile within the same ArchiFlute range rather than to a different material family entirely.

Where a different Lawhat range fits better

ArchiFlute is not the right starting point for a brief that wants a flat surface, whether that is a convincing wood, marble or stone look from the bamboo range, genuine natural stone from flexible stone, or a soft, padded, acoustically warm surface from fabric panels. This site's own material families explainer works through all four side by side if the material decision itself is still open.

Choosing a profile without a showroom visit

Start from the job the wall needs to do, not the finish. A joinery run or tight space points to Nova or Tempo's narrower scale. A large, open feature wall wanting genuine visual impact points to Arco or Forma. A wall that needs to actually do acoustic work, not just look textured, points to Quadra. Once the profile is settled, the finish conversation, wood tone, Linen, Ripple, Moonstone, Frost or Sandstone, follows from there.

Budgeting across the range

As a rough guide at the time of writing, Nova and Tempo start from around AED 165 to 195 per panel. Arco and Quadra sit in the AED 225 to 350 range depending on width and finish. Forma, the largest format, runs from AED 300 up to AED 725 for the bundled options. Treat these as orientation rather than a quote, since bundle size and finish move the final figure meaningfully within each profile.

FAQs

Is ArchiFlute a single product or a range? 

A range. It covers five distinct WPC profiles, Nova, Arco, Forma, Tempo and Quadra, spanning ribbed, fluted and slatted panels across fifty individual products.

What material is ArchiFlute made from? 

WPC, wood plastic composite, a denser and more heat-stable material than a printed or extruded PVC panel, confirmed on Lawhat's own site as suitable for both interior and exterior applications.

Which ArchiFlute profile is best for acoustics? 

Quadra, the slatted profile. Its genuine open gaps between slats let sound pass through rather than only reflecting off a solid face, unlike the sealed, continuous surface of the ribbed or fluted profiles.

Can different ArchiFlute profiles be used in the same project? 

Yes, and it is common practice, a narrower Nova or Tempo run in a joinery section paired with a large-format Arco or Forma feature wall elsewhere in the same property, often in matching or complementary finishes.

Is ArchiFlute more expensive than Lawhat's bamboo range? 

Pricing overlaps rather than one being universally more expensive; the more relevant question is which profile and finish suit the wall in question, flat versus genuinely three-dimensional, since that decision usually settles the material choice first.

How do I choose between the five profiles without visiting the showroom? 

Start with the wall's job: a tight joinery space, a large feature wall, or a genuinely acoustic application, and that narrows the choice to one or two profiles before the finish conversation begins.

To see all five ArchiFlute profiles and compare scale, finish and rib depth in person, the ArchiFlute collection is on display at the Lawhat Dubai showroom.